What are the good types of furniture plates

1 Multilayer board

The material of multi-layer board is made of several relatively thin layers of wood (or wood chips) glued with adhesive to form a three-layer or multi-layer plate material, usually with an odd number of layers, and make the fiber direction of adjacent layers of veneer perpendicular to each other. Multi-layer board waterproof performance is slightly stronger, but in the length direction of the anti-deformation will be slightly weaker than the particle board.

2 Particle board

Particleboard, also known as particleboard, is a wood-based board made of wood or other lignocellulosic materials. After adhesive is applied, it is glued under heat and pressure. Particle board has low price, stable performance, not easy to deform, moisture-proof and durable. Is the most commonly used custom furniture plate.

3 Density board

Density board is wood fiber or other plant fiber as raw material, fiber preparation, applying synthetic resin, under the condition of heating and pressing, pressed into the board. The density board has a flat surface and is often used as a base layer for molding door panels, cladding door panels, or as a balance layer under wood skin in custom furniture. It is easy to finish, has a large expansion rate in water, and has a poor nail holding force.

4 Fingerplate

Finger joint plate, also called tooth joint plate, is made of wood strips of the same width, thickness and length or different lengths. The two ends of the length direction are serrated by special woodworking equipment respectively. White latex is coated on the serrations at the ends of two adjacent wood strips. After pressurization, pressure relief, maintenance and waiting, the large-area flat wood plates formed by mutual insertion and engagement are called tooth joint. Because the serrated interface is similar to the finger cross docking, it is also called finger board. The finger board has the natural texture of wood and can be directly polished to make paint. But the price is high, generally can not be used directly.

5 European pine board (OSB)

Opine board is also the oriented strand board. When the particle board is formed, the upper and lower two surface layers of the oriented strand board arrange the board glue particles vertically according to its fiber direction, while the core layer particles are arranged horizontally to form a three-layer structure board embryo, which is then hot-pressed into the oriented strand board. This kind of plate unidirectional strength is very high, can be used as a structural material, the appearance of more personality. Also see a lot of home improvement began to use OSB instead of woodworking board to make cabinets on site.

Well, the above is the type of furniture plate which is good, the type of furniture plate related content introduction, I hope you can help!